You are here: Home > Help Center > Trade Show Display Guides & Resources > Pop-Up Displays Guide
We found 0 results matching your criteria.

Pop-Up Display Guide

Pop-Up Displays Guide: HopUp, Embrace & OneFabric Compared

A pop-up display is the fastest way to put a full-size branded backwall in your booth. The frame folds into a small bundle, expands in seconds and takes a printed fabric graphic. APG carries three pop-up lines. This guide shows how they differ so you can pick the right one the first time.

50+ years helping exhibitors · Family owned · Real people on the phone

10ft HopUp straight pop-up trade show display with full fabric graphic
CompareSide-by-side chartView ↓ HopUpTried and trueView ↓ EmbraceClean SEG edgesView ↓ OneFabricRecycled fabricView ↓ How to ChoosePick your lineView ↓ FAQQuick answersView ↓

On This Page

This guide covers everything you need to choose a pop-up display:

The Basics

What Is a Pop-Up Display?

A pop-up display is a collapsible aluminum frame that expands like an accordion into a freestanding wall. A printed fabric graphic attaches to the front, and optional end caps wrap the sides for a finished look. Because the frame and graphic travel together, one person can usually set up a 10ft pop-up in minutes with no tools.

Pop-ups come in tabletop, 8ft and 10ft widths. A 10ft display fills the back of a standard 10x10 booth, and two or three units line up for 10x20 trade show booths and larger spaces.

Side by Side

HopUp vs. Embrace vs. OneFabric

All three lines use a lightweight anodized aluminum frame and dye-sublimated fabric graphics. The biggest differences are how the graphic attaches, how the edges look and what comes in the box.

Feature HopUp Embrace OneFabric
Best forProven, affordable backwall for frequent showsThe cleanest, most premium lookComplete kits and eco-minded brands
Graphic attachmentHook-and-loop (Velcro) edgesSEG push-fit graphic in perimeter channelsHook-and-loop (Velcro) edges
Edge lookSoft fabric edgesCrisp, clean edgesSoft fabric edges
FabricDye-sublimated tension fabricDye-sublimated SEG fabricOne Planet fabric made from 100% recycled plastic bottles
LightingBacklit HopUp models availableBacklit models with built-in LED lightingKits include two LED lights
Typical setup5–10 minutes10–20 minutes (backlit)5–10 minutes
WidthsTabletop, 8ft, 10ft, 10x20, 10x30Tabletop, 8ft, 10ft8ft, 10ft, 10x20, adjustable
Hardware warrantyLifetime against manufacturer defectsLifetime against manufacturer defectsOne year against manufacturing defects

Specs above are for the most popular 10ft straight models. Check each product page for exact sizes, weights and what is included.

The Three Lines

Meet APG’s Pop-Up Display Lines

1

HopUp Pop-Up Displays

HopUp is the tried-and-true line and APG’s best-selling pop-up. The 10ft straight model assembles to about 119"W x 90"H, ships in one box at roughly 42 lbs and sets up in 5–10 minutes. Add end caps, lights or a hard case as you need them.

Shop 10x10 HopUp Displays →
2

Embrace SEG Pop-Up Displays

Embrace pairs the speed of a pop-up with SEG (silicone edge graphic) fabric that pushes into channels around the frame. The result is a tight, clean edge with no visible fasteners. Backlit Embrace models add LED lighting for a glowing wall that stands out on a busy show floor.

Shop Embrace Displays →
3

OneFabric Pop-Up Displays

OneFabric graphics are printed on One Planet fabric, made from 100% post-consumer recycled plastic bottles. Popular kits include the frame, graphic with end caps, two LED lights and a shipping case that converts into a counter.

Shop 10x10 OneFabric Displays →
OneFabric 10ft pop-up display kit with recycled One Planet fabric graphic and counter case

Exhibit Greener

OneFabric: A Pop-Up Made From Recycled Bottles

One Planet fabric recycles about one plastic bottle for every square foot of fabric. A 10ft OneFabric graphic with end caps measures about 142" x 89" — roughly 88 square feet, or about 88 bottles kept out of landfills. Add a printed table throw and a typical small booth recycles a couple hundred more.

  • 100% post-consumer recycled plastic bottles
  • Certified recycled content under the Global Recycled Standard (GRS)
  • Flame retardant to NFPA 701
  • Smooth matte finish for vivid, sharp printing
  • Naturally wrinkle resistant and lightweight

How to Choose

Which Pop-Up Display Is Right for You?

Choose HopUp if…

  • You want a proven backwall at the best value
  • You need sizes from tabletop up to 10x30
  • You want to add lights, end caps or a hard case later

Choose Embrace if…

  • Clean, frameless-looking edges matter to your brand
  • You want a backlit wall that glows on the show floor
  • You want the premium look with pop-up speed

Choose OneFabric if…

  • Sustainability is part of your brand story
  • You want a complete kit with lights and a counter case
  • You need an 8ft, 10ft, 10x20 or adjustable layout

Still deciding? See all pop-up trade show displays, or compare pop-ups with tension fabric displays and banner stands.

FAQ

Pop-Up Display FAQs

What size pop-up display do I need for a 10x10 booth?

A 10ft pop-up display fits the back wall of a standard 10x10 booth. An 8ft display leaves extra room for a counter or banner stand beside it.

How long does it take to set up a pop-up display?

Most 10ft HopUp and OneFabric displays set up in 5 to 10 minutes. A backlit Embrace display takes about 10 to 20 minutes.

What is the difference between HopUp and Embrace?

Both use a collapsible aluminum frame. HopUp graphics attach with hook-and-loop (Velcro) edges, while Embrace uses SEG push-fit fabric in channels around the frame for cleaner edges and an optional backlit look.

Is One Planet fabric really made from recycled bottles?

Yes. One Planet fabric is made from 100% post-consumer recycled plastic bottles, with recycled content certified under the Global Recycled Standard. It recycles about one bottle per square foot of fabric.

Can I replace the graphic on my pop-up display?

Yes. You can order a new graphic for your existing frame and reuse the hardware, which is an easy way to refresh your booth for a new message or brand update.

How long does it take to get a pop-up display?

For most products, plan on 10 to 12 business days from the time we receive your print-ready art until the display is in your hands. The “Delivery Date Needed” field at checkout shows the first available date.

Not Sure Which Pop-Up Display You Need? Call Us.

Tell us your booth size, your show date and how often you exhibit, and a real person will point you to the right display.

See all Trade Show Display Guides →