 |
 |
 |
|
Café Barrier 5ft x 3ft Indoor-Outdoor Sign System
Complete version with hardware and graphics.
The Cafe Barrier is an indoor/outdoor modular display system that includes heavy-duty stainless steel posts, base, and 59" rails, printed on an outdoor scrim material. This display system is a stylish way to define areas or direct traffic flow inside or outside restaurants, bars, retail establishments, airports, museums, casinos or at tradeshows. Unit kit, extension kit and individual components available. Can be used with extensions any length.The banner portion is about 59" long, so each segment is about 5 1/4 feet long. They can bend at virtually any angle. The 'extension' product that has only one upright pole and base is here.
Product Includes:
- 2 bases
- 2 Upright poles
- 2 Horizontal poles
- Outdoor scrim custom printed graphics
Product Options:
Product Details:
- Indoor/outdoor modular display system with heavy-duty stainless steel posts, base, and rails
- Printed on outdoor scrim
- Total visual area: 53.25"w x 30.5"h
- Indoor/outdoor modular display system
- Stylish way to define areas or direct traffic flow
- Easy to position, set up, and remove
- Unit kit, extension kit and individual components available
- One year limited hardware warranty against manufacturer defects
- One year graphic limited warranty
Hardware Dimensions
- Assembled unit: 75.39"w x 37.6"h x 14.5"d
- Base plate: 14.5"dia. x 1.59"h
- Upright: 36"
- Cross pole: 59"
- Weight (includes graphic): 40 lbs
|
Graphic Dimensions
- Total visual area: 53.25"w x 30.5"h
- Pole pocket on top and bottom
- Refer to related graphic template for more information
|
Shipping Details:
- Ships in Two Boxes
- Box 1 (2 CROSS POLES): 60"l x 2"h x 2"d — 4 lbs.
- Box 2 (2 UPRIGHTS): 38"l x 9"h x 5"d — 6 lbs.
- Dimensional weight: 11 lbs.
- Box 3 (2 Bases): 15"l x 15"h x 4"d — 28 lbs.
Production and delivery timeline:
- Note that all products with printing involve several steps to get your product printed
- Pre-Production:
- Artwork must be transferred to our FTP site, collected from the FTP and sent to the print department.
- Next the artwork must be matched to the print template (not a problem if our templates are properly used
- Next the artwork is checked for problems (like low resolution no bleed, missing elements)
- Next the artwork is rendered as a low-resolution e-proof for you to approve.
- Next the job is put into the print queue.
- That process usually takes about 1 day but can be 3-4 or more depending on problems with your artwork
- Production Starts: (This is where the 'clock starts') for production timing.
- Typically 1-2 days after the job is ordered, can be much longer if there are problems.
- Production days are only 5-days/week normal week days and exclude national holidays and certain black-out dates
- Shipping:
- Shipping is mostly via FedEx ground. most of our products can ship FedEx express
- Shipping takes typically 3-6 days depending where you are in the country.
- Make sure you plan for Pre-Production, Production and Shipping to meet your in-hands date.
- Use the maps below to estimate the shipping time for your location. This product can ship from NV or IL, pick the closest to you.
For your convenience we provide artwork templates in Adobe Illustrator.
Please download the product template file and then open in Adobe Illustrator in order for the template size to be correct (this includes pdf template files). DO NOT RESIZE TEMPLATE FILE. Please submit your art files based on the product template according to our Art Guidelines. Your order may be delayed if art submitted does not meet our guidelines and/or if art is not sized to the product template.
Opening the template file directly into Adobe Photoshop will not provide your art at the correct size. The file needs to be opened in Adobe Reader or Illustrator first to get specific template measurements and to create your template with correct size in photoshop in order for art to match the size of the product template.
|
|
|
 |
|
 |
|
Live Chat
866.752.2192
